acceptodds
Under review as a conference paper at ICLR 2027

-Steering: Action Refinement with Tactile Forecasts and Feedback via Velocity-Field Steering

Abstract

Tactile sensing plays a crucial role in everyday human interaction. Consider inserting a plug into a tight socket, vision alone provides limited guidance during the final insertion stage, and we instead rely on both anticipated contact and realized tactile feedback to ajust the insertion motion. The same capability is equally important for robots, particularly in dexterous manipulation tasks. Yet many contemporary robot policies remain vision-dominant. This visual bias, compounded by limited tactile data and sparse contact events, can cause directly incorporated tactile signals to be ignored or even compromise the policy's pretrained capabilities, yielding degrading performance as observed in our experiments. We present -Steering, which refines actions via learned residual steering of the flow-matching action expert's velocity field, using a tactile mixture-of-experts architecture to integrate both tactile forecasts and real-time tactile feedback. Together with specific designed three stages training recipe, -Steering enables tactile signals to correct and, when necessary, redirect the flow-matching action-generation process, while building on the strong action-generation capacity of the vision-based foundation policy. Extensive experiments across six simulated and six real-world manipulation tasks demonstrate the effectiveness of -Steering. It outperforms the strongest evaluated baselines by 10.7 percentage points in average simulation success rate and 9.1 percentage points in average real-world progress success rate.

Primary area:
applications to robotics, autonomy, planning
Keywords:
robot policy, tactile, asynchronous inference

Reviews

Among:
Shape:
1234this paper, Top 49%
Figure 1. Mean review rating of the reviewed papers at ICLR 2027. This paper averages 2.33 over 3 reviews, above 51% of the others.
Reviewer_G9jWOpenReview ↗
Rating
2
Confidence
4
Informativeness
2
Presentation
3
Soundness
2
Read review
Paper summary

This paper proposes TF²-Steering, a visual-tactile robot manipulation framework that combines tactile forecasting and real-time tactile feedback to refine actions generated by a pretrained flow-matching policy.

The method introduces a tactile world model to predict future tactile representations and a tactile correction expert that learns residual velocity-field corrections during the flow-matching action generation process. An asymmetric attention mechanism and gradient isolation are employed to preserve the pretrained visual action generation capability.

The framework further adopts a dual-rate asynchronous inference mechanism, where low-frequency world models provide cached predictive priors and high-frequency action experts incorporate real-time tactile feedback for action refinement. A three-stage training procedure is used for tactile prediction pretraining, tactile velocity correction pretraining, and task-specific fine-tuning.

Experiments on six simulated and six real-world manipulation tasks demonstrate improvements over several visual and visual-tactile baselines. The method achieves an average simulation success rate of 68.3% and an average real-world progress success rate of 71.5%. Ablation studies investigate the contributions of tactile forecasting, real-time feedback, velocity-field correction, and asynchronous inference.

Critical strengths
  1. Practical integration of tactile forecasting and real-time feedback.

The paper presents a reasonably well-designed framework that integrates predicted tactile information and real-time tactile feedback into a pretrained robot policy. The asymmetric attention and gradient isolation mechanisms provide a practical way to incorporate tactile corrections while preserving the original visual action generation capability. The asynchronous dual-rate architecture is also meaningful for contact-rich manipulation, where tactile feedback and high-level planning operate at different temporal scales.

  1. Promising empirical results on diverse manipulation tasks.

The paper evaluates the proposed framework on six simulated and six real-world manipulation tasks, covering a range of contact-rich interactions. The improvements on precision insertion, bottle-cap twisting, zipper closing, and other dexterous tasks are encouraging. The ablation studies also provide useful evidence that real-time tactile feedback and intermediate action-generation refinement contribute to the observed performance improvements.

Critical weaknesses
  1. Limited methodological novelty of the proposed velocity-field steering mechanism.

The central technical formulation, v_refined = v_base + Δv_tactile, is essentially a learned residual correction to the flow-matching velocity field. This is closely related to existing guidance and velocity-field adaptation techniques in diffusion and flow-matching models. Although it is not mathematically identical to classifier guidance, the underlying idea of modifying the generative vector field using an additional conditional signal is well established.

The tactile expert, asymmetric attention, gradient isolation, and dual-rate inference mechanisms are also closely related to existing architectural and control strategies. Therefore, the paper appears to primarily combine established techniques rather than introduce a fundamentally new learning or generation mechanism.

More importantly, the experimental evaluation does not sufficiently isolate the methodological contribution of velocity-field steering. The comparison against action-space residual correction is useful but insufficient. Stronger baselines, such as standard tactile-conditioned flow matching or a conventional learned velocity-field residual adapter under matched training and computational settings, are needed to demonstrate that the proposed formulation offers advantages beyond existing guidance mechanisms.

  1. Insufficient evidence for the unique contribution of tactile forecasting and the robustness of the reported improvements.

The paper emphasizes the collaborative use of predicted tactile information and real-time tactile feedback. However, the ablation results indicate that removing predicted tactile information reduces the average progress success rate by only 2.7 percentage points, whereas removing real-time tactile feedback causes a substantially larger decrease of 9.3 percentage points. This raises questions about the actual contribution of the tactile world model relative to its architectural and computational complexity.

Furthermore, the real-world evaluation primarily reports progress success rate rather than full task completion success rate. While progress-based evaluation is useful, it does not directly establish the reliability of successful task execution. The evaluation also uses only 20 trials per task without reporting uncertainty estimates.

Finally, the comparison with T-REX may be influenced by differences in feedback update schedules, since the paper explicitly notes that T-REX uses a fixed refinement interval in the evaluation. Additional controlled comparisons would be helpful to determine whether the improvements arise from the proposed steering formulation, the tactile forecasting component, or differences in inference and feedback scheduling.

Questions for authors
  1. What is the fundamental methodological difference between the proposed velocity-field steering and existing learned guidance or residual velocity-field adaptation methods?

The formulation appears to be a standard residual correction of the flow-matching vector field. Could the authors provide comparisons with conventional tactile-conditioned flow matching or learned velocity-field residual adapters using the same backbone, tactile inputs, and comparable parameter and training budgets? Such comparisons would help clarify the actual novelty and effectiveness of the proposed steering mechanism.

  1. How essential is the tactile forecasting component?

According to Table 3, removing predicted tactile information causes a relatively small performance decrease compared with removing real-time feedback. Could the authors clarify under which contact conditions or manipulation scenarios tactile forecasting provides a substantial advantage over reactive tactile feedback alone? In particular, does the forecast improve contact anticipation, reduce correction latency, or enable behaviors that cannot be achieved with a purely reactive tactile policy?

  1. Can the authors provide more rigorous real-world evaluation and controlled baseline comparisons?

It would be helpful to report full task completion success rates in addition to progress success rates, together with uncertainty estimates across evaluation trials. Also, since the comparison with T-REX uses a fixed tactile refinement interval, could the authors evaluate different feedback update frequencies under comparable computational budgets to better isolate the benefits of the proposed approach?

  1. What is the actual end-to-end inference latency of the asynchronous steering system?

The paper reports a 240 ms action-chunk generation time and describes a dual-rate system with 5 Hz world-model updates and 30 Hz action execution. Could the authors clarify the measured latency of each tactile-guided action regeneration, including tactile encoding and flow-matching iterations, and the effective correction frequency achieved during real-world execution?

3 comments
AuthorsOpenReview ↗

Response to Reviewer G9jW (1/2)

[Q1 & W1] Clarify the fundamental methodological difference between the proposed velocity-field steering and existing residual velocity-field adaptation methods, and compare them using the same backbone, matched parameter counts, and comparable training budgets.

Thank you for raising this important question. Classifier-guidance-style methods train a classifier or scoring model and use its gradients with respect to intermediate samples to steer generation toward higher scores. TouchGuide follows this general approach for action generation: it uses contrastive learning to train a scoring model that assigns higher scores to actions paired with matching tactile and visual observations. During flow-matching inference, the score gradient with respect to the candidate actions provides a velocity correction that guides subsequent sampling. TF²-Steering shares the additive velocity-correction form but constructs the correction differently. Rather than deriving it from a score gradient at inference time, our tactile expert directly predicts Δv from tactile inputs and action context, trained end-to-end through imitation learning with a flow-matching loss.

Regarding residual velocity-field adaptation, we agree that TF²-Steering is an instance of this approach for tactile-guided robotic manipulation. Our contribution lies in adapting this formulation to tactile control. We adopt this design because it allows additional conditioning while retaining the base policy’s ability to operate independently, making it well suited to fine-grained action corrections driven by tactile feedback. We discuss the novelty and motivation of TF²-Steering in detail in C2.

In C1, we compare TF²-Steering (E1), learned score-gradient guidance (E5), and tactile-conditioned flow matching (E3) using the same world-action backbone. Table A details their architectures, tactile inputs, and training configurations. E1 and E3 receive the same Stage 2 training budget, and E1 achieves higher PSR on all three tasks, averaging 72.7% versus 69.0%. The gap widens to 11.0 percentage points when touch is disabled without retraining, with E1 achieving 63.3% and E3 achieving 52.3%. This supports the benefit of a separate correction branch in retaining visual-only task performance. In our reproduction, E5 achieves 60.7% average PSR, close to the vision-only E0 baseline at 60.3%, indicating limited benefit from gradient guidance in the tested configuration. E5 uses only real-time touch and a separately trained scoring model, as specified in C1.

[Q2 & W2] When does predicted tactile information improve task performance beyond real-time tactile feedback?

Thanks for raising this question. We believe tactile prediction is particularly useful for improving task efficiency and recovering faster from failed contact attempts. In bottle-cap twisting, the policy sometimes fails to grasp the cap and rotates its fingers without holding it. With predicted touch, we observe quicker adjustments toward a correct grasp; without it, recovery tends to require more time and repeated attempts.

To examine this behavior, we compare the full model (predicted + real-time touch) with the variant without predicted tactile inputs (real-time touch only), using the corresponding ablation training configurations from Table 3 of the main paper. We adopt a stricter success criterion: the robot must complete the task with at most one failed grasp attempt; otherwise, the trial is counted as a failure.

VariantTactile inputsSR (%)
Full modelPredicted + real-time40.0
Without predicted tactileReal-time only15.0

Under this criterion, predicted touch improves SR by 25 percentage points, supporting its contribution to task completion with fewer failed grasp attempts.

AuthorsOpenReview ↗

Response to Reviewer G9jW (2/2)

[Q3 & W2] Can the evaluation include full-task success rates, uncertainty estimates, and baseline comparisons across feedback frequencies under comparable compute budgets?

Thanks for this suggestion. Table G is computed from the original evaluation records underlying Table 2 in the main paper, with 20 trials per method per task. We additionally report PSR as mean ± standard error (SEM) to quantify uncertainty, alongside full-task success rates.

Table G. PSR (mean ± SEM) / full-task success rate (%).

MethodFruit placementZipper closingBoard wipingBottle-cap twistingCup separationDropper transferAvg. PSRAvg. SR
ViTacFormer12.5±2.9 / 0.04.0±1.8 / 0.02.0±1.4 / 0.09.0±2.3 / 0.07.0±2.2 / 0.02.0±1.4 / 0.06.10.0
π0.560.0±7.1 / 25.018.0±3.8 / 0.036.0±7.8 / 20.026.0±4.1 / 0.062.0±6.1 / 25.039.0±7.6 / 5.040.212.5
π0.5 + tactile57.5±6.6 / 20.012.0±3.4 / 0.039.0±8.9 / 25.022.0±4.1 / 0.057.0±7.1 / 25.023.0±6.2 / 10.035.113.3
T-Rex72.5±6.5 / 40.056.0±6.4 / 20.061.0±7.7 / 35.058.0±8.7 / 35.087.0±5.9 / 75.040.0±8.5 / 15.062.436.7
FTP-175.0±6.5 / 45.036.0±4.5 / 0.055.0±7.9 / 30.040.0±6.2 / 10.064.0±6.4 / 30.046.0±9.0 / 25.052.723.3
TF²-Steering70.0±7.6 / 50.060.0±7.1 / 30.076.0±7.3 / 60.067.0±7.9 / 45.090.0±4.9 / 80.066.0±8.0 / 35.071.550.0

TF²-Steering supports adjustable feedback intervals at inference time to accommodate different tasks. Table E evaluates three tasks with updates every 2, 4, 6, or 8 action steps. Bold entries indicate the settings used in Table 2 of the main paper.

Table E. Feedback-update interval ablation. Entries report PSR (mean ± SEM) / full-task success rate (%).

Update interval k (action steps)Bottle-cap twistingDropper transferCup separationAvg. PSRAvg. SR
259.0±8.0 / 35.063.0±8.2 / 35.085.0±6.6 / 75.069.048.3
467.0±7.9 / 45.066.0±8.0 / 35.088.0±5.1 / 75.073.751.7
665.0±7.7 / 40.065.0±8.6 / 30.088.0±5.1 / 75.072.748.3
860.0±8.1 / 35.064.0±8.4 / 40.090.0±4.9 / 80.071.351.7

Updating every 2 steps yields lower PSR than every 4 steps on all three tasks, suggesting that overly frequent action regeneration can be counterproductive, potentially due to accumulated correction errors. An interval of 4 provides consistently good performance across tasks. For cup separation, increasing the interval to 8 achieves the highest PSR and full-task success rate while requiring fewer inference calls, illustrating the benefit of adapting the update interval to the task.

[Q4] What is the latency of tactile-guided action regeneration, and how frequently are action commands sent?

Thanks for raising this question. On a single RTX 4090, each tactile-guided action regeneration takes 72.19 ms on average, including tactile encoding and all 10 flow-matching steps. Tactile encoding takes 12.15 ms and is already included in the total.

For a fast-update interval of kk action steps, one cycle includes an update taking 72.19 ms and k−1k-1 steps at the nominal 30 Hz control rate. The estimated cycle duration and average action-command frequency are:

\qquad f_{\mathrm{cmd}}(k)=\frac{k}{T(k)}\ \text{Hz}.$$ **Table F. Estimated average action-command frequency at different fast-update intervals.** | Fast-update interval $k$ | Cycle duration (ms) | Average action-command frequency (Hz) | |---|---:|---:| | 2 | 105.52 | 18.95 | | 4 | 172.19 | 23.23 | | 6 | 238.86 | 25.12 | | 8 | 305.52 | 26.18 | These estimates assume cached world-model priors and exclude sensor acquisition, communication, scheduling, and chunk-initialization overhead. The **30 Hz shown in the pipeline is the nominal control rate**; we will clarify this in the figure caption.
AuthorsOpenReview ↗

Official comment by authors

Dear Reviewer G9jW, thank you for your time and thoughtful feedback. Since the review period ends today, we would greatly appreciate it if you could take a moment to review our response and update your comments or score if appropriate. Thank you again for your consideration.

Reviewer_w9dmOpenReview ↗
Rating
3
Confidence
4
Informativeness
2
Presentation
3
Soundness
2
Read review
Paper summary

TF2\mathrm{TF}^{2}-Steering combines low-frequency visual and tactile world-model predictions with high-frequency tactile feedback for contact-rich manipulation. A tactile expert integrates predicted and observed tactile features to produce additive corrections to the action expert's flow-matching velocity. The method uses asynchronous action updates, tactile prediction and correction pretraining, and task-specific fine-tuning. Experiments cover six simulation tasks and six real-robot tasks, with real-robot ablations of tactile inputs, correction mechanisms, architecture, and pretraining.

Critical strengths
  1. The framework provides a coherent way to combine predictive context with incoming tactile feedback during action generation. The asynchronous execution scheme and training with delayed feedback connect the model design to the practical need for responsive contact control.
  2. The empirical evaluation includes both simulation and dexterous real-robot manipulation. The full system improves average real-world progress score over the evaluated baselines, and the real-robot ablations examine several important components. These experiments provide useful evidence for the complete system and the value of tactile feedback and pretraining.
Critical weaknesses
  1. The comparison does not sufficiently isolate the proposed correction mechanism from existing tactile-guided generative refinement methods. TouchGuide [1] provides a method for steering diffusion and flow-matching action sampling using gradients of a tactile-conditioned contact-feasibility score with respect to the action. However, the paper neither cites nor compares against this method. The distinction between this approach and directly learning a velocity residual should be discussed and experimentally examined. T-Rex is included in Table 2, but the complete systems differ in backbone architecture and pretraining conditions. This comparison therefore does not establish whether the proposed correction mechanism is preferable to T-Rex-style cascaded flow matching under matched conditions. A controlled comparison using a common backbone, comparable pretraining data and budgets, and matched downstream training and feedback conditions would better support the claimed advantages of the design.
  2. The initialization used for the correction-mechanism ablation may favor the proposed formulation. Appendix A.3.1 states that all Table 3 variants start from the same Stage 2 checkpoint, which has already been trained for velocity-field correction. The action-space residual variant changes its correction target only during task-specific post-training. However, this comparison cannot distinguish whether the advantage comes from correcting the velocity field or from pretraining specifically for that correction mechanism. Giving the alternative mechanism corresponding pretraining with the same data and budget would make this comparison more informative.

[1] Zhemeng Zhang et al. TouchGuide: Inference-Time Steering of Visuomotor Policies via Touch Guidance. Robotics: Science and Systems, 2026. https://www.roboticsproceedings.org/rss22/p078.html

Questions for authors
  1. Can the authors compare the learned velocity residual with TouchGuide-style guidance using gradients of a tactile-conditioned contact-feasibility score with respect to the action and T-Rex-style cascaded flow matching on the same world-action backbone? Please use the same pretraining data for these methods. This would clarify which gains are attributable to the correction mechanism rather than the surrounding system.
  2. Does the advantage over action-space residual correction persist when that variant receives its own corresponding pretraining, instead of switching objectives only after Stage 2?
  3. Please cite TouchGuide [1] and analyze the relationship between its gradient-based inference-time steering and the proposed learned velocity correction.

[1] Zhemeng Zhang et al. TouchGuide: Inference-Time Steering of Visuomotor Policies via Touch Guidance. Robotics: Science and Systems, 2026. https://www.roboticsproceedings.org/rss22/p078.html

2 comments
AuthorsOpenReview ↗

Response to Reviewer w9dm

[Q1 & W1] How do TF²-Steering, T-Rex, and TouchGuide compare using the same backbone and comparable training budgets?

Thanks for raising this concern. In C1, we compare TF²-Steering (E1), T-Rex-style cascaded refinement (E4), and TouchGuide-style guidance (E5) using the same world-action backbone. Table A details their architectures, tactile inputs, and training configurations. In Table A.1, E1 achieves higher PSR on all three tasks, averaging 72.7% versus 65.3% for E4. We suspect that E4’s lower performance stems from requiring a newly trained tactile expert to independently predict the full velocity during the final four denoising steps, despite having substantially less training data than the pretrained action expert. In contrast, TF²-Steering retains the pretrained action expert throughout generation and uses the tactile expert to learn only the velocity correction, allowing tactile refinement to build on the foundation policy’s pretrained capabilities.

In our reproduction, TouchGuide-style guidance (E5) provides little improvement over the vision-only baseline (E0), with average PSR of 60.7% versus 60.3% in Table A.1. We reproduced the paper’s model architecture and training procedure and verified that the trained Contact Physical Model (CPM) achieved 95% accuracy in distinguishing matched from mismatched observation–action pairs on the test set. However, this discrimination ability did not translate into effective action refinement through score gradients in our evaluation, which used a guidance scale of 3. Table A.2 likewise shows only a small reduction in open-loop action MSE with TouchGuide-style guidance.

[Q2 & W2] Does the advantage over action-space residual correction persist when both methods receive comparable pretraining?

Thanks for raising this concern. In C1, E2 receives action-residual supervision from Stage 2 onward, using the same pretraining data and budget as E1. In Table A.1, E1 achieves an average PSR of 72.7%, compared with 60.0% for E2, showing that the advantage of velocity correction persists with objective-specific pretraining. E2 also performs similarly to the vision-only baseline E0 (60.3%), suggesting that post-generation action residuals provide limited additional refinement in this setting. Consistently, Table A.2 shows only a small reduction in E2’s open-loop action MSE when tactile correction is enabled (0.120 versus 0.123 without touch).

[Q3] Cite TouchGuide and discuss the relationship between its gradient-based inference-time steering and TF²-Steering’s velocity-field steering.

Thank you for pointing us to TouchGuide; we have added the citation in updated version. Both methods refine actions during flow-matching generation by adding a tactile-informed delta velocity to the base policy’s velocity. The key difference is how this delta velocity is obtained. TouchGuide uses contrastive learning to train a scoring model that assigns higher scores to actions paired with matching tactile and visual observations. At inference time, the score gradient with respect to the candidate actions provides the delta velocity, guiding generation toward higher-scoring actions. TF²-Steering instead learns the delta velocity directly through imitation learning. Its tactile expert takes tactile inputs and action context and predicts the correction, trained end-to-end with a flow-matching loss. We stop gradients through the base velocity when computing this loss and use one-way attention: the tactile expert can access base-policy features, while the base policy cannot access tactile features. This allows the tactile expert to learn the correction without introducing tactile information into the base policy.

Reviewer_w9dmOpenReview ↗

Thank You for the Response

Thank you for the helpful discussion and additional experiments. I will maintain my rating.

Reviewer_khjZOpenReview ↗
Rating
2(+1)
Confidence
4
Informativeness
1
Presentation
3
Soundness
3
Read review
Paper summary

This paper presents a hierarchical model for robotic manipulation. Its main novelty appears to be a split architecture for flow-matching models. The authors evaluate the proposed approach against recent baselines in both simulated and real-world settings.

Critical strengths

Unfortunately, I did not find the methods or experiments particularly interesting.

Critical weaknesses

The robotics community is increasingly saturated with papers that tweak standard architectures (to claim "novelty"), compare models without careful controls (e.g. pretraining dataset, network capacity etc.), and report extensive results on simple tasks where baseline performance is surprisingly weak, possibly due to uncontrolled factors. This paper falls into this class.

  1. Motivation and architecture. Why split the model into two components at each hierarchical layer? I would be more interested in a controlled study comparing split vs. non-split architectures, parameter counts, and other relevant factors. Without these controls, it is difficult to conclude that one architecture is inherently better than another. The current ablations do not seem to address these questions.

  2. Task selection. The abstract mentions inserting a plug into a tight socket, but where is this task demonstrated? As a robotics researcher, I find the presented tasks less convincing, since they seem manageable without tactile input, potentially with appropriate arm compliance.

Questions for authors

Some minor suggestions on presentation. In figure 1 and 2, terms like "Visual World Prior" is very confusing. If it is just some latent vectors/tokens, you can name it directly. Also when illustrate the model, it is better to present it as a DAG so readers can easily understand how the prediction/output is made.

Figure 4 seems irrelevant to the central claim of this paper. Ablating model architecture is more important.

====

Update after rebuttal:

Since the paper used mismatched pretrained backbones, data, and protocols across methods, the scientific contribution feels unclear. Demonstrating A+B > C+D (or A+C in narrow domains) resembles component tweaking rather than a distinct scientific advance. If the scientific contribution cannot be more clearly established, some solid system contributions are essential (similar to the pretrained models or datasets provided by PI and T-Rex). I encourage the authors to rethink this aspect.

1 comment
AuthorsOpenReview ↗

Response to Reviewer khjZ

[W1] Why use separate modules for both world modeling and action generation, and how do split and non-split architectures compare under controlled conditions?

Thanks for raising this question. As discussed in C2, our split architecture is motivated by preserving the pretrained foundation policy’s generalization capabilities, rather than architectural novelty. Separate modules, one-way attention, and stop-gradient are designed to retain the base policy’s structure and limit interference from tactile adaptation.

Inference efficiency is another key consideration. Our bimanual Sharpa setup produces 10 tactile images per timestep, alongside three camera images. Predicting both modalities with the base video model increases model forward latency by 75.3% compared with using a separate tactile predictor, as shown in Table B.

Table B. Low-frequency model forward latency.

ArchitectureTotal model forward latency (ms) ↓
Split: TF²-Steering94.93
Non-split: shared video backbone166.42

We report mean model forward latency on an RTX 4090, excluding VAE encoding. The prediction window contains the current frame and 24 future frames for each visual and tactile stream.

We conduct a controlled comparison between split (E1) and non-split (E3) architectures for the action-generation module, as detailed in C1. In Table A.1, E1 achieves higher PSR on all three tasks, with an average improvement of 3.7 percentage points (72.7% vs. 69.0%). When we further disable the tactile branches at evaluation without retraining, E1 retains an average PSR of 63.3%, compared with 52.3% for E3, a gap of 11.0 percentage points. This supports our design goal of preserving visual-only performance through a separate velocity-correction branch, whereas directly integrating tactile tokens into the action expert leads to a larger performance drop when touch is unavailable. Consistently, on the selected open-loop subset in Table A.2, E1 has lower action MSE without touch than E3 (0.116 vs. 0.131).

[W2] The demonstrated tasks provide limited evidence for the value of tactile sensing, and the plug insertion task mentioned in the abstract is missing.

Thanks for raising this concern. Our tasks are primarily designed to evaluate contact-rich manipulation under visual occlusion: confirming a secure grasp when twisting a bottle cap or picking up a board eraser, and checking fingertip contact with the target cup wall when separating cups. Our dexterous hand controls each joint’s absolute angle, requiring more precise coordination than a simple gripper open/close command. When the fingers are occluded, vision alone may not reliably indicate whether a grasp or contact has been established, making tactile signal valuable. We have updated the supplementary material with three side-by-side comparison videos of whiteboard wiping, cup separation, and cap twisting. These videos compare successful rollouts with tactile input against failed rollouts without tactile input, illustrating cases in which the policy twists without holding the cap, fails to secure the eraser, or extends its fingers without contacting the cup wall when touch is unavailable.

Regarding plug insertion, we previously attempted this task on real hardware. The main bottleneck was recovery from misalignment: tactile could signal unexpected contact, but the policy still needed to learn to withdraw, realign, and retry, which requires appropriate recovery data. Our current teleoperation pipeline cannot systematically capture the failure states encountered during autonomous execution and the corresponding recovery actions. Addressing this limitation could involve online human intervention, as in Hand-in-the-Loop [1], or force-feedback teleoperation, as in PACE[2], which uses a sigma.7 haptic device to help operators demonstrate collision recovery and retries. We leave this data collection and recovery learning capability to future work and therefore did not include plug insertion in our real-world evaluation.

[1] Li, Zhuohang, et al. “Hand-in-the-Loop: Improving VLA Policies for Dexterous Manipulation via Seamless Hand-Arm Intervention.” arXiv preprint arXiv:2605.15157 (2026).

[2] Chen, Zhiyuan, et al. “PACE: Temporal-Role Tactile Conditioning for Chunk-Based Insertion Policies.” arXiv preprint arXiv:2610.16308 (2026). CoRL 2026 Oral.

[Q] Terms such as “Visual World Prior” are confusing; a DAG would make the pipeline and computation paths clearer.

We apologize for the confusing terminology. “Visual World Prior” and “Tactile World Prior” refer to the predicted visual and tactile features, respectively. We will clarify these descriptions and redraw the main pipeline as a DAG to make the computation paths clearer in the final version.

Comments on the paper

6 comments
AuthorsOpenReview ↗

General Response for Common Concerns (1/2)

[C1] Comparing tactile integration methods: training setup and architectures.

We thank reviewers khjZ (W1), w9dm (Q1 & W1; Q2 & W2), and G9jW (Q1 & W1) for requesting controlled comparisons of tactile integration methods. We address these shared concerns together below.

To clarify how different tactile integration mechanisms affect performance, we compare the following six variants.

Table A. Tactile integration variants.

VariantTactile inputsHow touch affects action generation
E0: Vision onlyNoneThe action expert generates actions without tactile modules or losses.
E1: TF²-SteeringPredicted + real-timeThe tactile expert predicts Δv during flow matching, correcting the base velocity at each iteration.
E2: Action residualPredicted + real-timeThe tactile expert predicts Δa after action generation, supervised by corrected-action MSE.
E3: Tactile-conditioned flow matchingPredicted + real-timeTactile and visual tokens jointly condition a single action expert that predicts the full velocity, without a separate tactile expert.
E4: T-Rex-style cascadePredicted + real-timeThe action expert performs the first 6 denoising steps; the tactile expert completes the remaining 4 steps using intermediate actions and touch.
E5: TouchGuide-style guidanceReal-time onlyA contrastively trained scoring model provides action gradients to guide the fixed E0 policy.

Key comparisons. E1/E2/E4 use identical architectures and parameter counts, isolating the integration mechanism and its training objective. E3 removes the tactile expert and feeds tactile tokens directly into the action expert; all other components remain unchanged. E5 is our paper-based reimplementation because official code was unavailable during our experiments; it uses real-time touch only.

Training setup. E0–E4 start from the same Stage 1 checkpoint, with E0 loading only the shared visual/action modules. Each variant then receives Stage 2 pretraining with its own objective, followed by task-specific post-training. Since full pretraining takes approximately 2 days on 32 H100 GPUs, we restrict this comparison to Sharpa data from T-REx and FTP-1, using 20,000 steps with a global batch size of 512. This reduces training cost while retaining task-relevant data to help preserve dexterous manipulation performance after post-training. E5 reuses the trained E0 policy and separately trains its scoring model.

Real-robot evaluation (Table A.1). We follow the same evaluation protocol as Table 3 in the main paper. For E1/E3 with touch removed at evaluation, we disable tactile inputs only during evaluation, keeping the trained weights unchanged.

VariantBottle-cap twistingZipper closingCup separationAverage
E0: Vision only48.053.080.060.3
E1: TF²-Steering66.060.092.072.7
E2: Action residual48.054.078.060.0
E3: Tactile-conditioned flow matching63.056.088.069.0
E4: T-Rex-style cascade59.053.084.065.3
E5: TouchGuide-style guidance48.057.077.060.7
E1: Touch removed at evaluation52.054.084.063.3
E3: Touch removed at evaluation40.044.073.052.3

Open-loop evaluation (Table A.2). Using Stage 2 checkpoints, we measure normalized action MSE over 16 steps against expert demonstrations in contact-rich validation segments. E1–E4 keep visual and predicted-tactile context fixed and regenerate actions with updated recorded touch every 4 steps. E5 receives only the initial tactile observation; E0 uses vision only. We evaluate clean inputs, Gaussian noise added to tactile images, and removal of tactile inputs and correction/guidance paths, using the same segments and initial action noise.

VariantClean inputsTactile noiseTouch removed
E0: Vision only0.1230.1230.123
E1: TF²-Steering0.1100.1360.116
E2: Action residual0.1200.1180.123
E3: Tactile-conditioned flow matching0.1080.1750.131
E4: T-Rex-style cascade0.1200.1320.115
E5: TouchGuide-style guidance0.1210.1200.123
AuthorsOpenReview ↗

General Response for Common Concerns (2/2)

[C2] Motivation and novelty of TF²-Steering

We thank reviewers khjZ (W1) and G9jW (Q1 & W1) for raising questions about the motivation and novelty of our design. We provide a unified clarification below.

We do not claim velocity-field correction itself as a novel mechanism; this approach has been explored in other domains, as discussed in our related work. Our main motivation for applying it to tactile-guided robotic manipulation is to incorporate tactile signal while preserving the generalization capabilities of a pretrained foundation policy. Our design premise is that the foundation policy should determine the overall action plan, while tactile information provides fine-grained adjustments based on local contact conditions. Velocity-field correction naturally supports this division of roles: the base velocity defines the overall direction of action generation, and the tactile delta velocity refines it during generation. This motivates our use of an explicit correction branch, together with one-way attention and gradient isolation, to limit interference with the base policy.

Reviewer_khjZOpenReview ↗

Thank you for the update

I appreciate the authors' effort and am willing to increase my score to 2.

However, my core concern remains:

with mismatched pretrained backbones, data, and protocols across methods, the scientific contribution feels unclear. Demonstrating A+B > C+D (or A+C in narrow domains) resembles component tweaking rather than a distinct scientific advance.

If the scientific contribution cannot be more clearly established, some solid system contributions are essential (similar to the pretrained models or datasets provided by PI and T-Rex). I encourage the authors to rethink this aspect.

From OpenReview, CC BY 4.0. Authors as signed there; shown unedited.

Related papers

Loading the map…

Discussion (0)

Sign in to comment.