- Rating
- 3
- Confidence
- 3
- Informativeness
- 2
- Presentation
- 3
- Soundness
- 2
Read review
Paper summary
This paper introduces GenLimitLib, a Lean 4 library for research on language generation in the limit. It contains formal developments for 30 papers and tracks 405 scoped claims, with full coverage of 217. Core, Support, and Bridge modules organize shared definitions, reusable proofs, and cross-paper relationships. Mathematical case studies include a proof repair, a transferred impossibility construction, and an exact characterization of a special-case tradeoff. Across five new theorem tasks, access to the full library increases proof-generation success from 48% to 79%. Reading experiments also show improvements from relevant library-derived content.
Critical strengths
- The library provides substantial reusable infrastructure for a connected research area. Its separation of shared definitions, paper-specific assumptions, and cross-paper relationships is useful, and the formalization boundaries are explicitly disclosed.
- The mathematical case studies demonstrate value beyond collecting existing results. The proof-generation experiments also include meaningful controls: identical theorem targets, source papers, environments, and time budgets, together with proof-availability and reasoning-effort comparisons.
Critical weaknesses
- The completed source-alignment audits need clearer reporting. Section 3.3 defines three audit levels covering statements, algorithms, and proof dependencies, but does not summarize how many papers or claims have completed each level. The reported formalization coverage therefore does not directly show how extensively these different aspects of source fidelity have been checked.
- The proof-generation evidence is concentrated in a small, library-informed task set. The 300 runs cover only five theorem tasks, generated using the same library and five-paper neighborhood. Table 2 shows that Task D contributes 20 of the 31 additional successes under PML. Benefits also occur elsewhere, but the aggregate improvement has limited evidence for transfer to independently selected research problems.
Questions for authors
- Could you briefly summarize the audit levels completed, the review procedures, and the semantic, computational, and probabilistic guarantees checked within the declared formalization scope? This would help readers assess source alignment, a central contribution of the library.
- How representative are the five proof-generation tasks of the broader library? Could you validate the findings on a small set of independently selected theorems, or clarify the extent to which the conclusions are specific to the evaluated research neighborhood?
- Section 5.2 acknowledges that the reading experiments primarily measure the benefit of curated information. Could you add a natural-language control containing the same mathematical information, to distinguish the contribution of Lean representation from that of additional relevant facts?
5 comments
W2: Task concentration and transfer
Thank you for this point.
We agree that Task D contributes most of the additional successes. The task-level results suggest that success gains are closely related to library reuse (Table 2(b)). However, efficiency benefits extend across tasks. PML lowers the API cost per valid proof across all tasks where both P and PML succeed by approximately 10% on A, 28% on B, and 57% on C (Table 10).
Extension to independently selected research problems. To extend the evaluation beyond the five theorems developed using the library, we tested Theorems 1.4 and 1.5 of a recent paper Hallucination Rates in Language Generation (arXiv:2607.23361). The paper is outside the five-paper sub-library. The paper was first posted on July 25, 2026, after the July 9 gpt-5.6-sol model snapshot used in our experiments. Neither its text nor its Lean proofs were provided to the model. We followed the Section 5.1 protocol without a supplied proof, with five runs per theorem, resource condition (P or PML), and effort level (high or medium).
- Theorem 1.4: P achieved 8/10 successes and PML 9/10. Among successful runs, PML reduced the API cost per valid proof by 33.0% at high effort and 27.4% at medium effort and reduced mean time to the first valid proof by 32.5% and 30.5%, respectively. The successful PML proofs reused fresh-value helpers and sparse-set counting and limit lemmas from the sub-library.
- Theorem 1.5: Neither condition proved the full statement (0/10 each). Both proved the complete special case where in 5/10 runs. The PML partial proofs mainly reused interface definitions and basic helpers and developed the central diagonal constructions themselves.
Theorem 1.4 provides evidence of efficiency benefits for a published theorem outside our task generation using the sub-library.
In a future revision, we plan to evaluate more new, nontrivial theorems from papers outside the selected sub-library. We aim to cover a wide range of research questions in this area and potential library reuse, which is challenging in a limited time. Our new experiment on Theorems 1.4 and 1.5 provides a starting point for this broader evaluation.
We have added our current experiment in Appendix B.4 (in blue in the revision).
Q2: Task representativeness
Our evaluation uses dense generation (Paper P39) as a starting point and considers its interactions with noise, omissions, feedback, and infinite contamination (Papers P06, P12, P17, P19). This models a common research setting, where new results were developed by combining ideas from closely related papers.
Within this neighborhood, the five tasks span a wide range of observed library reuse: 16.8%–91.9% among successful PML proofs. Our experiment results suggest that the availability of reusable results is an important factor in the library’s benefit. Our additional tests of Theorems 1.4 and 1.5 in a recent paper extend the evaluation beyond the original task-generation pipeline.
We expect similar benefits in other research neighborhoods where relevant results can be reused, and plan to test this through broader evaluation.
Q3: Section 5.2 natural language control
Thank you for this suggestion. We have added the control.
Setup. The new arm takes the statements of the "Paper + relevant Lean" block, in the same order, and rewrites each one as fluent mathematical prose of about the same length. Identifiers are read as ordinary words (e.g. HasInfiniteClosureDimension H becomes "H has infinite closure dimension"), and no Lean syntax remains. The median block is 1,829 tokens, vs. 1,724 for the Lean.
The prose was written by Claude Opus 5.5, which saw only the Lean statements (no question, option or answer). To make sure each line says exactly what its Lean statement says, every line was checked by Claude Sonnet 5.5, which caught all 147 errors we planted as a test, and a careful line-by-line audit of 240 random lines by Claude Opus 5.5 found one minor omission. The prose was frozen before the run. All other settings match Table 4.
| Reference material | Accuracy (%) | Difference from relevant Lean |
|---|---|---|
| Paper | 69.7 | −8.87 [−11.96, −5.91] |
| Paper + unrelated Lean | 71.5 | −7.12 [−9.95, −4.48] |
| Paper + relevant Lean | 78.6 | — |
| Paper + the same statements as prose, length-matched | 78.6 | −0.04 [−1.39, 1.25] |
Interpretation. The prose recovers the full gain over the paper alone (+8.8 [6.1, 11.8] points, vs. +8.9 for Lean), so the gain comes from the content of the selected statements rather than from Lean syntax. This content is what formalization provides. The prose is a direct translation of the library’s Lean statements, yet the paper text they were formalized from gives only 69.7%, and unrelated Lean of the same length adds only 1.8 points. Formalization states each result explicitly and precisely, with its hypotheses, quantifiers and conclusion spelled out, and these statements help the model whether they are given in Lean or in English. We have added this control and its interpretation to Section 5.2, with details in Appendix C (in blue in the revision).
W1/Q1: Audit coverage, procedures, and scope
Thank you for suggesting that we report source-alignment audits more clearly.
Coverage. At submission, human audits covered selected main results in eight papers, including statement-level review (Level 1) of 35 source claims within their recorded scopes. Level 2 audits covered core algorithms and constructions in P00, P01, and P39. These include foundational algorithms in the area and the main algorithm used in our Section 5.1 experiments. A Level 3 audit covered P01’s semantic construction of the KM algorithm.
We have since expanded level 1 human audits, which check statements and their relevant definitions. These now cover 167/405 source claims (41.2%), including theorems, lemmas, definitions, examples, and other claims. They cover 122/147 main theorems (83.0%) in the source papers. We have additional LLM-based alignment checks for all source claims. Detailed audit records are available at: https://anonymous.4open.science/r/audit-evidence-review-2247/README.md
Initial human audits focused on selected results because early checks found few mismatches between Lean statements and their sources. This may be because definitions and theorem statements in language generation in the limit are generally precise, with little ambiguity.
Most apparent mismatches we found during the audit are Lean correcting source paper statements, proving stronger results under weaker assumptions, adding more details from the source proof into its statement, or splitting a source theorem into separate Lean statements. We documented these mismatches in our library. Among the statements reviewed, we found only one unintended translation error: the source stated (A⇒B)∧(C⇒D), but the Lean statement was (A∧C)⇒(B∧D). The original implications were in fact proved in Lean.
Review procedure. Human audits are conducted by domain experts familiar with the source papers. Level 1 checks definitions, assumptions, quantifiers, conclusions, and access models. Level 2 additionally checks algorithms and constructions. Level 3 checks intermediate lemmas and proof dependencies. We document stronger results and other justified differences, correct unintended translation errors, and also formalization scopes.
Besides human audit, we have Lean kernel checks and LLM-based audits. All formalizations compile without
sorry,admit, or project-defined axioms. The Lean kernel verifies proofs against their formal statements, but does not establish source alignment. In a separate LLM-based alignment check, an LLM translates Lean statements into natural language without seeing the paper, then compares the translation with the source. Human audits complement these checks by addressing ambiguities and errors that LLM reviews may miss.Guarantees and scope. Our audits generally follow the scope of the corresponding Lean statements. We record which semantic, computational, and probabilistic guarantees were checked, where applicable. We also record any restrictions and aspects outside the audit scope.
We have added our human audit coverage and audit details to Section 3.3 (in blue in the revision).