acceptodds
Withdrawn from ICLR 2027

Dexterous Tactile World Model

Withdrawn from ICLR 2027, so left out of the paper lists and the map.

Abstract

World models for manipulation are typically trained from video, yet the events that determine how manipulation unfolds, such as making and releasing contact, are difficult to observe visually and are often easier to sense through touch. We present the Dexterous Tactile World Model (DTWM), a video world model for future-frame prediction of egocentric manipulation from both observed video and tactile signals from a glove worn on each hand. We condition a pretrained video diffusion transformer on each hand's tactile signal through a zero-initialized residual at the corresponding hand location in the video tokens, while a causal mask prevents predicted frames from accessing future information. Compared with a vision-only model matched in architecture, parameters, and training, DTWM reduces the underestimation of hand motion from 23% to 9%, while reducing the perceptual error in the hand region by 7.4% across three training runs per model. The benefit also increases over the prediction horizon, with the improvement in the later predicted chunks being about 4.1x larger than in the first. DTWM also outperforms other visual-tactile world models under the same setting, and training with touch improves future-frame prediction even when no touch is available at inference. Ablations show that the model benefits from both the magnitude and spatial location of force: replacing the tactile signal with binary contact states, either per hand or per location, increases prediction error. The observed course of the force indicates whether the interaction will persist or change.

Primary area:
applications to computer vision, audio, language, and other modalities
Keywords:
World Model, Tactile Sensing, Dexterous Manipulation, Egocentric Video, Video Diffusion, Multimodal Learning

Reviews

Among:
Shape:
1234this paper, Bottom 10%
Figure 1. Mean review rating of the reviewed papers at ICLR 2027. This paper averages 1.67 over 3 reviews, above 10% of the others.
Reviewer_nHHCOpenReview ↗
Rating
2
Confidence
4
Informativeness
1
Presentation
3
Soundness
2
Read review
Paper summary

This paper proposes Dexterous Tactile World Model (DTWM), a tactile-conditioned video diffusion model for forecasting egocentric human manipulation. It adapts a pretrained Wan video diffusion transformer using LoRA and introduces a spatial conditioning mechanism that injects glove pressure and finger-flexion measurements into visual tokens around the corresponding hand locations through Gaussian-weighted residuals.

Given 13 observed RGB frames, synchronized tactile measurements, reconstructed hand poses, and a task description, the model generates the following 36 RGB frames without future tactile observations or actions. Experiments on the EgoTouch dataset compare DTWM against a matched vision-only baseline and adaptations of existing visuotactile world models. DTWM achieves approximately 2% lower full-frame LPIPS on the main held-out benchmark, with larger improvements on a smaller three-run evaluation. The paper additionally analyzes prediction horizons, hand motion, and the predictive information contained in continuous tactile measurements.

The proposed system is fundamentally a passive, observation-conditioned video forecasting model rather than an action-conditioned environment simulator.

Critical strengths

1. Controlled evidence for the predictive value of tactile sensing. The capacity-matched vision-only baseline is a meaningful experimental design, isolating the contribution of tactile measurements while retaining the same model architecture, parameter count, and training recipe. DTWM consistently improves perceptual prediction metrics, and the reduction in hand-motion underestimation is encouraging. The analysis showing larger improvements at later prediction horizons also suggests that tactile observations provide information relevant to the evolution of manipulation beyond immediate visual appearance.

2. Simple, potentially useful spatial integration of tactile observations. Projecting whole-hand tactile measurements into video tokens at the corresponding hand locations is an intuitive and computationally straightforward design. The comparisons with other tactile-conditioning mechanisms and the ablations of pressure magnitude versus binary contact provide useful empirical observations. The paper is also clearly written and provides substantial implementation and evaluation details.

Critical weaknesses

1. Fundamental limitation in the world-model formulation and lack of evidence for interactive simulation or downstream utility.

My primary concern is the distinction between predicting the likely continuation of an observed human manipulation sequence and modeling the consequences of controllable actions. DTWM learns a conditional distribution of future RGB frames given historical video, tactile measurements, hand poses, and a task description. Critically, it does not condition on future actions or predict future tactile states.

Consequently, the model cannot explicitly evaluate alternative interventions, such as changing grip force, releasing an object, or selecting a different manipulation trajectory. It predicts what is likely to happen next under the behavior distribution observed during training, rather than what would happen under a specified action. Moreover, without predicted tactile states, it is unclear how the proposed tactile-conditioning mechanism could support extended autonomous rollouts beyond the evaluated 1.2-second horizon without additional physical measurements or another predictive model.

This is particularly consequential given the paper's motivation in Section 1, which emphasizes using world models for synthetic data generation, policy initialization, and simulated environments for policy training and evaluation. None of these downstream uses is experimentally demonstrated. While passive video forecasting is a valid research problem, improvements in forecasting accuracy do not establish the ability to perform counterfactual physical simulation. Existing tactile world-model research, including TouchWorld and related approaches, already demonstrates the usefulness of tactile information in manipulation and, in some cases, evaluates downstream planning or control.

I therefore find the practical significance of the proposed model insufficiently established. The paper demonstrates improved tactile-conditioned video continuation, but not a corresponding advance in interactive manipulation modeling or a validated downstream application.

2. Insufficient isolation of the methodological novelty and limited evidence of improved physical dynamics.

The paper's distinctive architectural contribution is the spatial placement of tactile embeddings around reconstructed hand locations. However, the experiments do not directly establish whether this spatial alignment is responsible for the reported improvements. A controlled comparison using the identical tactile embedding and injection architecture, but with uniform, fixed, or randomly displaced spatial placement, is missing. The adapted TouchWorld, VT-WM, and FeelWorld comparisons change additional architectural details and do not fully isolate the effect of spatial alignment.

Furthermore, the method embeds each hand's entire tactile vector into a single feature placed around the hand centroid, rather than explicitly aligning individual pressure locations with corresponding image locations. The binary contact ablations also change multiple information sources simultaneously, including the spatial pressure pattern and finger-flexion information. Therefore, the specific contribution of spatially structured tactile conditioning remains unclear.

The improvements in direct motion and geometry metrics are also considerably less substantial than the headline perceptual results suggest. On the main 3,000-clip evaluation, full-frame LPIPS improves by approximately 2.0% on ID clips and 2.2% on OOD clips, while hand-region LPIPS improves by only 1.4% and 2.6%, respectively. Hand silhouette IoU changes from 0.475 to 0.476, and trajectory DTW improves from 10.41 to 10.37 pixels (Tables 1 and 10). Although the optical-flow magnitude result is stronger, these measurements provide limited evidence that the model actually predicts hand-object interactions or contact transitions more accurately.

The prominently reported 7.4% hand-region LPIPS improvement also comes from a smaller 73-episode held-out evaluation rather than the main 3,000-clip benchmark. These differences warrant further explanation, especially given the observed training-run variability and the fact that the OOD evaluation contains only three distinct tasks.

Overall, the experiments support the usefulness of tactile observations for perceptual video forecasting, but do not yet convincingly establish either the necessity of the proposed spatial-conditioning mechanism or a substantial improvement in modeling physical manipulation dynamics.

Questions for authors

1. Intended deployment and utility of the world model. Given that DTWM does not condition on future actions or predict future tactile states, what concrete downstream application is enabled by the model in its current formulation? In particular, how could it be used to evaluate candidate actions, support interactive simulation, or provide tactile-conditioned rollouts beyond the initial prediction horizon? Is there evidence that its improved video forecasts yield benefits for downstream manipulation, representation learning, or policy initialization? Clarifying the intended use and providing a corresponding evaluation would materially affect my assessment of the contribution's significance.

2. Isolation of spatial tactile conditioning. Can the authors compare the proposed hand-centered Gaussian residual against parameter-matched uniform, fixed-position, and randomly displaced spatial conditioning, keeping the tactile embeddings, injection blocks, and optimization identical? This would directly test whether the proposed spatial alignment contributes beyond simply providing tactile measurements. Additionally, can pressure-only and finger-flexion-only ablations distinguish the contributions of these two sources of information?

3. Evaluation of actual contact and manipulation dynamics. Can the authors evaluate whether DTWM improves the correctness of predicted grasp/release events, hand-object contact persistence, or object trajectories, rather than primarily perceptual similarity? This seems especially important given the negligible changes in hand IoU and trajectory DTW relative to the vision-only baseline. Results stratified by contact-changing versus contact-stable interactions would help establish whether tactile conditioning improves the physical events motivating the method.

4. Causality of tactile preprocessing. Appendix A states that pressure and flexion measurements are normalized using per-episode maxima. Are these maxima calculated over the entire recorded episode, including frames beyond the observation window? If so, the normalized historical tactile input indirectly depends on future measurements, potentially introducing information unavailable during actual inference. Could the authors clarify this procedure and, if necessary, report results using strictly causal normalization or fixed training-set statistics?

Reviewer_xxdMOpenReview ↗
Rating
2
Confidence
3
Informativeness
2
Presentation
2
Soundness
1
Read review
Paper summary

This paper proposes Dexterous Tactile World Model (DTWM), a video prediction model that incorporates tactile signals from both hands to improve future-frame prediction of egocentric manipulation. The method injects tactile features into a pretrained video diffusion transformer at the corresponding hand locations using Gaussian spatial weighting. Experiments on the EgoTouch dataset demonstrate improvements over a vision-only baseline and several visual-tactile world model baselines, particularly in hand motion prediction and perceptual quality.

Critical strengths

The paper addresses an important problem in physical AI, particularly the difficulty of predicting contact-rich manipulation from visual observations alone.

Incorporating whole-hand tactile signals into a video world model is a reasonable approach, as tactile information provides additional cues about contact and manipulation.

The proposed spatial conditioning mechanism is relatively simple and can be integrated into a pretrained video diffusion transformer.

The experiments include comparisons with a carefully matched vision-only baseline and several existing visual-tactile conditioning approaches.

The paper provides useful ablation studies on tactile information, including pressure magnitude and contact states. The analysis across multiple training runs and prediction horizons also strengthens the experimental evaluation.

Critical weaknesses

The quantitative improvements are relatively limited. On the main evaluation, the proposed method improves LPIPS by only around 2% over the vision-only baseline. Improvements in hand IoU and trajectory distance are also marginal, from 0.475 to 0.476 and from 10.41 to 10.37, respectively. Although the method improves predicted motion magnitude, PSNR and SSIM are worse than the vision-only baseline. These important evaluation metrics are reported only in the appendix rather than in the main experimental results. It is unclear whether the overall improvements are sufficiently meaningful given the additional tactile sensing and model complexity.

The methodological novelty is somewhat limited. The proposed method mainly combines a pretrained video diffusion transformer with tactile feature injection through zero-initialized residual connections. The tactile encoder is a simple linear projection, and spatial alignment is performed at the hand centroid rather than individual tactile contact locations. The method largely builds on existing multimodal conditioning techniques rather than introducing a fundamentally new world modeling approach.

The evaluation does not sufficiently establish improvements in physical interaction understanding. The model predicts only future RGB frames, while hand motion metrics are estimated afterward from generated videos. These metrics rely on visual proxies such as glove silhouettes and optical flow, rather than actual hand kinematics or contact measurements. The paper does not directly evaluate whether the model accurately predicts contact transitions, object slipping, grasp stability, or other physical interactions. Such evaluations are important given the paper's emphasis on contact-aware world modeling.

The comparisons with existing visual-tactile world models have limitations. The authors adapt the tactile conditioning mechanisms of existing methods to their own backbone and dataset rather than evaluating the original systems. These implementations also differ in the number of trainable tactile parameters. Therefore, the comparisons mainly demonstrate the relative effectiveness of different conditioning mechanisms under the authors' implementation, rather than establishing the superiority of the complete proposed model over existing systems.

The generalizability and practical utility are insufficiently demonstrated. All experiments use a single human manipulation dataset with one tactile sensing configuration. The out-of-distribution evaluation covers only three tasks, and the model is not evaluated on robot manipulation or downstream policy learning. Since the proposed model predicts future video without action conditioning, its usefulness for robot planning and control remains unclear.

Questions for authors

PSNR and SSIM are worse than the vision-only baseline, and these important results should be reported in the main paper rather than relegated to the appendix.

Reviewer_wMrjOpenReview ↗
Rating
1
Confidence
4
Informativeness
1
Presentation
2
Soundness
1
Read review
Paper summary

This paper proposes DTWM, a conditional video continuation model trained on human manipulation clips from EgoTouch. Starting from a pretrained 5B flow-matching video transformer (Wan2.2-Fun-5B-InP) adapted with LoRA, the model takes 13 observed RGB frames (0.43 s), projected 3D hand skeletons, a template task string, and whole-hand pressure and finger-flexion readings from two gloves, then predicts the next 36 RGB frames (1.2 s) in one block-causal pass. No actions, future poses, or future tactile targets are modeled. Each hand's tactile channels are linearly embedded into a single vector and added into five transformer blocks via a zero-initialized projection weighted by a 2D Gaussian at the observed hand centroid. All evaluations measure offline frame and 2D optical-flow/silhouette alignment on held-out 1.2-second human video clips, comparing DTWM against a capacity-matched vision-only control, binarized-touch inputs, and three alternative ways of feeding the same glove vector into Wan2.2.

Critical strengths

Clean vision-only control and dataset sanity checks. The baseline keeps the exact same 217.7M trainable parameters, 3D hand-skeleton stream, and hand-weighted loss while zeroing out only the glove input, evaluated under a 300-second session holdout. The appendix analysis showing that grip-force trends over the 0.43 s window help predict upcoming grasp releases (Table 14) is also a useful check on the data.

Critical weaknesses
  1. DTWM has zero robotics evaluations. Section 1 motivates the model as an environment for robot policy training, evaluation, and planning, yet DTWM takes no actions at all and includes no robot, simulator, policy, or planning experiments. Without actions, predicting 1.2 seconds of human video mixes contact physics with guessing what the person will do next. That shows up in the 3,000-clip hand metrics (Table 10): silhouette IoU (0.475 vs. 0.476), trajectory DTW (10.41 vs. 10.37 px), and optical-flow direction agreement (0.039 vs. 0.041) do not improve over vision-only.

  2. The comparisons to VT-WM, FeelWorld, and TouchWorld misrepresent what was run. Figure 1, Figure 4, and Table 1 claim DTWM outperforms existing visual-tactile world models, yet Appendix C.3 reveals none of those systems were actually evaluated. VT-WM and FeelWorld are action-conditioned robot world models built for inference-time planning, and TouchWorld adapts to robot hands to drive a policy. Here, the authors strip out actions, robot embodiments, and tactile encoders, turning "VT-WM" into 26 scratch-MLP tokens appended to action-free Wan2.2 for one epoch (with half the parameters), while their "FeelWorld" and "TouchWorld" ports score worse than using no touch at all. Presenting one-epoch, action-free Wan2.2 conditioning ablations in the main text as if they were the full prior systems seriously misrepresents the baselines and prior work in the field, and on its own warrants rejecting the paper.

  3. The main LPIPS gains are single-seed and smaller than the model's own seed-to-seed variance. Where three seeds were trained (Table 7), the vision-only control spans 0.4677 to 0.5281 LPIPS and beats DTWM's first seed twice. The abstract's 7.4% hand-crop LPIPS headline comes from a 73-clip subset pulled by that 0.5281 outlier. On the main 3,000-clip set (Table 1) and touch ablations (Table 2), every row is a single 6-hour run where ID gains drop to 2.0% LPIPS (0.4243 to 0.4157) and 1.4% hand-crop LPIPS (0.3273 to 0.3227), and disabling touch at test time makes ID hand-crop LPIPS worse than the vision-only baseline (0.3297).

Questions for authors

Can you relabel Table 1 and Figures 1 and 4 as Wan2.2 conditioning ablations rather than full VT-WM / FeelWorld / TouchWorld baselines, and report 3-seed means and standard deviations on all 3,000 clips (including an ungated uniform-footprint control without hand coordinates)?

Given that DTWM takes no actions and hand trajectory metrics (IoU, DTW, flow direction) stay flat, can you show any downstream robot policy or planning task where DTWM improves over the vision-only Wan2.2 control?

From OpenReview, CC BY 4.0. Authors as signed there; shown unedited.

Related papers

Discussion (0)

Sign in to comment.