acceptodds
Under review as a conference paper at ICLR 2027

SNLP: Layer-Parallel Inference via Structured Newton Corrections

Abstract

Autoregressive language models execute Transformer layers sequentially, creating a latency bottleneck that is not removed by conventional tensor or pipeline parallelism. We study whether this layerwise dependency can be relaxed by treating the hidden-state trace across layers as the solution of a nonlinear residual equation and solving it with parallel Newton-style updates. While this view is principled, exact Newton corrections require expensive Jacobian-vector products and naive fixed-point iterations are unstable on trained Transformers. We introduce Structured Newton Layer Parallelism (SNLP), a training and inference framework that replaces exact layer Jacobians with cheap architecture-induced surrogate dynamics. In residual Transformers, this yields Identity Newton (IDN), where the correction reduces to a prefix-sum-like update; in mHC-style architectures, HC Newton (HCN) uses the model's residual mixing matrix. We also study SNLP-aware training, including pretraining regularization and direct SNLP-forward SFT. Experiments on Nanochat-scale Transformers show that SNLP exposes a practical speed-quality frontier: on 0.5B models, it reaches up to wall-clock speedup, and a less aggressive configuration reaches speedup without increasing PPL. The useful tradeoff comes from the biased finite-iteration computation induced by IDN/HCN rather than exact recovery of the sequential trace. We further show that SNLP-aware training mitigates downstream accuracy loss, and that SNLP can serve as a drafter for self-speculative decoding while a sequential verifier preserves output correctness.

Primary area:
foundation or frontier models, including LLMs
Keywords:
Parallel Inference, Layer Parallelism, Language Models, Newton Methods, Transformer Architectures, Inference Acceleration

Reviews

Among:
Shape:
1234this paper, Bottom 10%
Figure 1. Mean review rating of the reviewed papers at ICLR 2027. This paper averages 1.67 over 3 reviews, above 10% of the others.
Reviewer_ph3cOpenReview ↗
Rating
2
Confidence
2
Informativeness
2
Presentation
1
Soundness
1
Read review
Paper summary

This paper suggests a method to approximate the sequential operation of deep nets using parallelized newton iterations. It shows empirical results on the tradeoffs between speedup and perplexity.

Critical strengths
  1. The idea is interesting and potentially impactful.
  2. The paper contain many experiments.
Critical weaknesses
  1. The empirical results are simply not good enough. We trade-off perplexity for speed, and the tradeoff doesn't seem reasonable at the 3B model (3.9% PPL increase for 1.2x speedup). Even at the 0.5B model, the strongest result in terms of quality, which achieves a speed-up of 1.4, has K=1 so I think this means there is no non-trivial Newton correction. Also, the downstream performance (accuracy gap) and of-the-shelf model performance (no speedup) aren't great.
  2. This method cannot compute a full path going from input to output through all the layers, if it uses less iterations that the number of layers. Therefore, it will only work if the original net depth was not strictly necessary and could be replaced with width. Thus, this method is essentially replacing a deep architecture with shallower and wider architecture. Consequently, a necessary baseline (currently missing from the paer) would be to compare against a computationally comparable and more standard architecture (e.g., just shallower and wider to allow a fair comparison in terms of memory/compute/parallelizability/latency) distilled from the original architecture.
Questions for authors

I don't have any questions, but I have some comments on the presentation, to help the authors revise their papers:

• The writing keeps discussing concepts that were not yet explained (e.g., “but for IDN/HCN the surrogate is trivial to compute or available from the architecture, making correction cheap relative to a Transformer block”), and there are vague sentences (such as “Off-the-shelf sequential models need not have layer dynamics that match a cheap surrogate”, or “stride-selected supervised layers”, “one-shot batched forward”).

• Eq. 3 is hard to understand without explaining what is the initialization.

• in eq. 8 it will be good to more precisely define what the mixing matrices do (or at least reference the appendix).

• I didn't understand what does the sum over N in eq. 10 means or why do we have it.

• Some notation is not defined when they are first introduced, such as \mathcal{S} in line 251, or what does “surrogate family A” means in line 253. It is later becomes a bit clearer, but it takes too long to get there and which makes this unnecessarily hard to read.

• Not all acronyms are defined (e.g. SFT, mHC, FHE). Even if some acronyms are well-known, they should be defined for better accessibility.

• The paragraph “Inference-side effects” was not clear to me, and includes vague references to the appendix. For example, “This can reduce layerwise error compounding under the approximation in Section B.1”. What is this approximation and why is this important? the main paper should be self contained, and the appendix include only additional details which the readers can decide if they want to read; here it is unclear what information is in the appendix and if we should read it.

• “The results suggest that SNLP benefits from structured depth coupling rather than removing depth interactions”. Why? what implies this?

• What is IDN. Reg. or HCN Reg. ? I don't see where this was defined as a regularization, I thought it means a specific Newton correction.

• The columns in Table 2 and Table 3 are not defined in the table, and it is hard to find where they are explained in the text (they are not immediately near the table, and they are not referenced in the table).

• In equation 12 we have \epsilon, \epsilon_l and \epsilon_{l,b}, and the relation between all these is not clear.

2 comments

We sincerely thank the reviewer for the very careful reading and the detailed presentation comments; they will substantially improve the manuscript.

W1 (trade-off; 1.40× has K=1): We agree that the 3B trade-off is modest (see our response to sK25 on the regime). Our claim is a speed-quality frontier rather than a single operating point. 1×F12 is its single-chunk end, where the correction is zero by construction; the correction is what enables the multi-chunk points. Note that K=1 does not by itself imply a trivial correction: the correction vanishes for 1×F12 only because it has a single chunk. With more than one chunk, the IDN correction is active and essential even at K=1 (e.g., 12×F2 at 2.58× in Table 1). In Table 3, removing it at K=1 raises PPL from 17.2/17.9/18.0 to 37.4/67.2/div. for N=8/12/16. Please see C1 for a matched comparison with Calvo-style layer pairing and with the uncorrected iteration.

On downstream accuracy and off-the-shelf models, we agree that gaps remain and state them in the limitations. Both point to the role of SNLP-aware training. After standard SFT, switching inference to IDN costs 8.34 accuracy points on the 0.5B base model but only 0.37 points on the IDN-regularized model (3.25 vs. 0.38 points at 3B; App. D.1). Off-the-shelf models were not trained for a cheap surrogate, so matching their sequential PPL post hoc requires multiple iterations and yields no speedup (App. E.4).

W2 (shallower-wider baseline): We agree this is a natural and important baseline. A distilled shallower-wider model requires a new training run, which is beyond our rebuttal budget; we now discuss this baseline and its trade-offs in the limitations. SNLP is not equivalent to removing depth. The suffix layers are not droppable: in our early-exit table, skipping 8–16 layers raises PPL from 16.8 to 50–1785. SNLP also keeps a single set of weights whose depth/latency trade-off can be chosen per request, by choosing K or falling back to exact sequential inference. That is also what makes it usable as a self-speculative drafter verified by the same model, which a separately distilled shallow model cannot provide.

Presentation. Thank you; we have revised all points in the uploaded PDF:

  1. Concepts used before definition / vague phrases. Where Sec. 3.2 refers to the IDN/HCN surrogates, it now states what they are and points to Sec. 3.3. We also define precisely:

    • "one-shot batched forward": hl(0)=fl(hS)h_l^{(0)}=f_l(h_S), i.e., every suffix layer evaluated once on the prefix state in one batched call (fwd);
    • "stride-selected supervised layers": the subset TN\mathcal T_N of suffix layers whose states receive the matching loss.

    We also rephrased the vague sentence on off-the-shelf models.

  2. Eq. 3 initialization. Stated right after Eq. 3: hl(0)=hSh_l^{(0)}=h_S or hl(0)=fl(hS)h_l^{(0)}=f_l(h_S), referred to as h0 and fwd in Sec. 3.5.

  3. Eq. 8. We now define HresH^{res} in the main text: mHC keeps MM residual streams, and each attention/MLP sub-block updates them as x′=Hresx+HpostF(Hprex)x'=H^{res}x+H^{post}F(H^{pre}x), where HresH^{res} is the learned M×MM\times M stream-mixing matrix (details in App. B.2).

  4. Sum over N in Eq. 10. S\mathcal S is the set of suffix lengths used in training, so one model is trained for several parallel-suffix sizes at once. This is now stated explicitly.

  5. S\mathcal S and "surrogate family A". S\mathcal S is now defined at first use, and "surrogate family AA" is replaced by "surrogate A∈{I,Hres,diag(J)}A\in\{I, H^{res}, diag(J)\} for IDN, HCN, and DiagN".

  6. Acronyms. SFT, HC/mHC, and FHE are now spelled out at first use, and DEER and ELK are briefly described.

  7. "Inference-side effects". Rewritten to be self-contained. One-step IDN evaluates every suffix branch at hSh_S, so it differs from sequential execution by the summed substitution errors ∑lϵl\sum_l\epsilon_l, ϵl=gl(hl−1seq)−gl(hS)\epsilon_l=g_l(h^{seq}_{l-1})-g_l(h_S). This is a bias that SNLP training keeps small, while, to first order, errors do not compound through later layers. The appendix only contains the derivation.

  8. "Structured depth coupling". The sentence is softened and now cites its evidence: removing the correction degrades PPL sharply (Table 3, "No correction"; App. E correction propagation), and forward correction order is consistently best.

  9. "IDN Reg." / "HCN Reg." Defined in Sec. 3.4 and the Table 1 caption: models pretrained with the matching loss of Eq. 10 using the IDN or HCN surrogate, versus "No Reg." (standard pretraining).

  10. Table 2/3 columns. All columns are now defined in the captions, including "div." (PPL on the order of 10410^4 or more).

  11. Eq. 12 notation. ϵl\epsilon_l is the substitution error of layer ll and ϵl,b\epsilon_{l,b} its value at token bb; the stability constant in Eqs. 10 and 12 is renamed δ\delta.

I thank the authors for their response. However, following the same reasoning as reviewer CGhC, I still have the same concerns and vote for rejection.

Reviewer_CGhCOpenReview ↗
Rating
1
Confidence
3
Informativeness
2
Presentation
2
Soundness
2
Read review
Paper summary

The paper proposes SNLP, which uses inexpensive approximations to Newton updates to execute parts of a transformer in parallel across layers. It combines this inference procedure with dedicated training and layer fusion, and evaluates the resulting speed–quality tradeoffs on Nanochat models and in self-speculative decoding.

Critical strengths

1)The residual structure provides inexpensive surrogates for propagating corrections across layers. This avoids the substantial cost of computing full layer Jacobians and gives the proposed parallel computation a plausible implementation.

2)Table 8 provides evidence that SNLP-aware training reduces the accuracy loss caused by switching to IDN inference after sequential SFT. The architectural ablations and negative results on pretrained models also help identify the method’s current limitations.

Critical weaknesses
  1. The benefit of structured correction is not convincingly separated from training and layer fusion. In particular, the near-lossless 1.40× result uses a single fused chunk, for which the correction in eq.(11) is zero, so a matched comparison with the cited layer-parallel fusion approach is needed to establish the incremental contribution.

  2. The practical decoding benefit has not been established under a clearly specified, kv-cached end-to-end protocol. The 1.67× and 1.893× speculative speedups are estimates; although Table 10 reports complete evaluation times, that experiment disables kv caching.

  3. Improved IDN compatibility does not preserve absolute task performance: after sequential SFT, Table 8 reports 35.78% for the regularized 0.5B model with IDN inference, versus 38.36% for the unregularized sequential pipeline. The matched-perplexity slowdowns on qwen2.5 and TinyLlama in Table 14 further limit the demonstrated practical scope.

I recommend rejection because the submission does not establish a clear advantage of structured correction over matched layer-fusion alternatives, and the claimed practical benefit is not demonstrated under standard cached decoding. These gaps concern the paper’s central contribution and require additional experimental evidence; the current results do not provide a sufficiently convincing case for acceptance.

Questions for authors
  1. Can you separate the effects of SNLP-aware training, layer fusion, and structured correction through matched comparisons with the cited layer-parallel method? This is particularly important for interpreting the single-chunk 1.40× result.

  2. What end-to-end speedup is measured with kv caching enabled, including drafting, verification, cache updates, and rejected-token handling? Please specify the exact timing protocol behind Table 1 and compare against the corresponding sequential model under the same conditions.

  3. For the 1×F12 configuration, what are the downstream scores and greedy-generation agreement relative to the original unfused sequential model? The reported 100% AR Match uses the fused model as its reference and therefore does not establish this comparison.

  4. Does "divergence" in appendix C mean numerical overflow or failure within the tested iteration budget? For the finite feedforward chain with a fixed prefix, Jacobi should recover the sequential trace within at most N iterations in exact arithmetic, so this needs to be distinguished from mathematical nonconvergence.

2 comments

Thank you for the careful and technically precise review.

Q1 (separating training, fusion, and correction): Please see C1. In short, Calvo LP is a special case of chunked SNLP. 1×F12 is the single-chunk end of the frontier, where the correction is zero by construction. For multi-chunk configurations, the correction lets chunks run in parallel at no latency cost and gives lower PPL than LP or the uncorrected iteration at matched depth.

Q2 (KV-cached decoding; timing protocol): We did not implement a KV-cached SNLP decoder. Nanochat's KV-cache interface assumes sequential layer execution, so a layer-parallel suffix needs a cache conversion at every step; our initial cached version was slower than running without a cache and would not reflect the algorithm. The self-speculative speedups are estimates from measured drafter cost and acceptance, as stated in the captions and now in the limitations. A cache-native implementation is future work.

Table 1 protocol (H100): one forward pass over a short context, batch 1, no KV cache, BF16, SDPA attention, eager mode, same code path for sequential and SNLP; 50 warm-up and 200 timed runs, CUDA-synchronized, mean latency. PPL is evaluated separately at 2048 tokens. Re-timing on H200 reproduces the column within ±0.1× for contexts of 16–512 tokens (at 128: 2.63×, 2.16×, 1.50×, 1.81× for 12×F2 K1, K2, 1×F12, 24×F1 K2); at 2048-token prefill speedups are smaller (1.89×, 1.36×, 1.35×, 1.36×). The protocol is now in Sec. 5, the Table 1 caption is corrected, and both regimes are in App. F.1.

Q3 (1×F12 vs. the unfused model): We did not run downstream evaluation for 1×F12, a configuration of the w/o-x0ve model; the SFT table (Table 8, now Table 11) covers the standard 3B and 0.5B models. AR Match for fused variants deliberately uses sequential execution of the same fused weights as reference, isolating the solver's error from the effect of fusion; for 1×F12 at K=1 the solver is exact (single chunk, zero correction), hence 100%. Agreement with the original unfused model is given by the other Table 1 columns: PPL 17.56 vs. 17.57, prefill Top-1 87.7%, LogitSim 0.999, EmbSim 0.976. We did not measure greedy AR Match against the unfused model. Sec. 5 now states the reference of each metric.

Absolute accuracy and off-the-shelf models: We agree that SNLP-aware training preserves IDN compatibility rather than absolute accuracy: the regularized 0.5B model loses only 0.37 points when switching to IDN inference, but stays below the unregularized sequential pipeline (35.78% vs. 38.36%). Post-hoc SNLP on Qwen2.5/TinyLlama likewise gives no speedup at matched PPL. Both are stated as limitations.

Q4 ("divergence"): Thank you; our wording was not rigorous. With a fixed prefix, Eq. 5 is a quasi-Newton iteration on a finite feedforward chain, so for any surrogate, including Al=0A_l=0 (Jacobi), it reaches the sequential trace exactly after at most NN iterations (verified at N=24: zero error in BF16 for both Jacobi and IDN). The surrogate changes the intermediate iterates, not the solution. "Divergence" referred to iterates that stay far from the sequential trace or blow up within a useful budget K≪NK\ll N: vanilla Jacobi on trained models (σmax⁡≈44\sigma_{\max}\approx44) and the "div." entries in Table 3 (PPL of 10410^4 or more). On a randomly initialized 0.5B model in FP32, IDN reaches 4×10−34\times10^{-3} relative error at K=8, while Jacobi is still at 0.91. We now say "fails to approach the sequential trace within the iteration budget KK" and state finite termination (Sec. 3.2, App. B.4).

Thank you for the response. The new comparisons show that the correction improves PPL, and the finite-termination issue is resolved. However, the authors confirm that the reported timings exclude KV caching and that the speculative speedups remain estimates; the requested end-to-end cached decoding result is still missing. The near-lossless 1.40× configuration also uses zero correction and lacks downstream evaluation, while its 100% AR Match is measured against the fused model itself. I also share ph3c’s concern about the missing trained shallower/wider baseline: removing layers from an existing model does not test that alternative. These gaps leave the practical speed–quality advantage over simpler alternatives insufficiently demonstrated. I therefore maintain my rating of 1 (clear rejection).

Reviewer_sK25OpenReview ↗
Rating
2
Confidence
2
Informativeness
2
Presentation
2
Soundness
2
Read review
Paper summary

Authors introduce Structured Layer Newton Parallelism (SNLP) a framework to replace jacobian based corrections in parallel Newton style updates with cheap surrogates like Identity Newton and HC Newton. The structured surrogates allows SNLP to compute the output of final layers through parallel iterations. SNLP aware training regularization, trains model activations to be similar to parallel solver generated activations to improve parallelization effectiveness. Experiments on Nanochat models at 0.5B and 3B scale show that the approach provides speedups at minimal performance drop.

Critical strengths
  • Proposed Surrogates are simple and effective. It is interesting to note that without calculating exact jacobian, IDN provides similar perplexity(with regularization) as a sequentially inferred LLM.
  • The paper goes in depth in ascertaining improvements in speedups (different configs, controls and speculative decoding) and performance metrics.
Critical weaknesses

While the approach is clean and easy to implement, the improvements are marginal. Considering Table 1, the configs that give maximum speedups also give the maximum performance drop (e.g. 0.5B: 1.88x at +17% pplx, 3B: 1.2x at +3.9% pplx). Even with regularization the resulting improvements are modest and do not point towards scaling up to larger sizes (smaller speedups at larger size).

The quoted 1.40x speedup occurs in a modified 0.5B architecture that is weaker than the standard one (0.5B w/o x0ve: 17.57 vs 0.5B: 15.36) while the 2.58x speedup has a +17.0% pplx drop.

Authors point towards prefix computation and launch overheads and say that “Custom fused kernels or software-hardware co-design, such as compute-in-memory-style execution , may be needed to realize the algorithmic parallelism at larger scale.” but this is still a weakness for the work in current form.

Questions for authors

N/A

2 comments

Thank you for the review and for recognizing the simplicity of the structured surrogates and the depth of the speed/quality analysis.

W1 (marginal gains, scaling): We agree the gains are regime-dependent and want to state the regime precisely. SNLP does not reduce total computation; it shortens the sequential critical path across layers. It therefore helps when individual layers underutilize the hardware: small models, short contexts, small batches. The 3B results are weaker for exactly this reason. We ran additional measurements to make this explicit (H200, Table-1 configurations):

  • Not a launch-overhead artifact: with CUDA graphs (no CPU launch overhead), speedups largely persist: 12×F2 K1 2.35×, 1×F12 1.46×, mHC HCN 16×F1 K1 1.52×, 3B IDN 8×F1 K1 1.20×.
  • Where the gain shrinks: with CUDA graphs, 12×F2 K1 drops to 1.56× as width grows from 640 to 2048, and to 1.29× at batch 16. At 2048-token prefill it drops to 1.89× (eager).

We do not position SNLP as a universal large-model accelerator. It is a study of when layer-parallel execution is possible and how training enables it. Regimes where sequential nonlinear depth itself is the dominant cost benefit more directly; our FHE analysis (Appendix) reduces sequential nonlinear evaluations from 32 to 12 and bootstraps from 53 to 20. We have made this scope explicit in the introduction, with the full re-timing in App. F.1.

W2 (speed/quality trade-off, 1.40× on the weaker architecture): Yes, there is a trade-off, and Table 1 is meant to expose the frontier rather than a single operating point. We agree the 1.40× point is on the w/o-x0ve architecture, which has a weaker sequential baseline. We now state this next to the claim.

W3 (custom kernels): We agree this is a limitation of the current work and leave kernel/hardware co-design for future work.

Thank you for additional results and experiments. Authors propose to reduce the scope of claims and present it as a study of "layer-parallel execution is possible and how training enables it". However, it does not change the fact that the proposed regularization always shows speedups and performance degradation together. The approach in its current form does not seem viable. I maintain my score.

Comments on the paper

1 comment
AuthorsOpenReview ↗

Common response

C1: Relation to layer-parallel fusion (Calvo et al., 2026) and the role of the structured correction

We thank all reviewers for their feedback. We have uploaded a revised PDF; changes are marked in blue. New results are in App. B.4 (finite termination), App. B.5 (relation to Calvo et al.), and App. F.1 (re-timing).

We thank CGhC and ph3c for this question. Our main claim is that SNLP, combining a structured surrogate, SNLP-aware training, and chunkwise fusion, exposes a speed-quality frontier, not that a single configuration is best. The number of chunks CC moves along this frontier. 1×F12 is the C=1C=1 end: the whole suffix is one fused chunk, the correction is zero by construction, and the computation coincides with Calvo-style grouping extended from 2 to 12 layers. Such wide grouping is what SNLP-aware training makes usable. Without it, grouping collapses; for example, post-hoc 1×F8 on Qwen2.5-0.5B reaches PPL >105>10^5, versus 70.8 for Calvo pairs. With it, the 12-layer group is near-lossless (17.56 vs. 17.57). For C>1C>1 (e.g., 12×F2 in Table 1), the correction is what lets the chunks run in parallel. We have made this explicit in Sec. 3.5 and revised the related-work discussion accordingly.

Relation to Calvo et al. Their layer-parallel (LP) pair, u=x+Attnk(x)+Attnk+1(x)u=x+Attn_k(x)+Attn_{k+1}(x), out=u+MLPk(u)+MLPk+1(u)out=u+MLP_k(u)+MLP_{k+1}(u), is exactly our fused 2-layer chunk, and LP runs these pairs sequentially. Chunked SNLP with CC chunks and K=CK=C iterations reproduces LP exactly (proofs in App. B.4–B.5, also verified numerically). LP is therefore one point in the SNLP family, and the correction allows K<CK<C, i.e., a critical path of S+KS+K instead of S+CS+C block evaluations. The correction adds no measurable latency: IDN and the uncorrected (Jacobi) iteration time identically.

0.5B w/o x0ve, suffix N=24 (H200, Table-1 protocol)critical-path depthspeedup (eager / CUDA graph)
Calvo LP pairs (12×F2, sequential)201.77× / 1.60×
SNLP 12×F2, IDN K=192.67× / 2.37×
SNLP 12×F2, IDN K=2102.19× / 1.77×

Quality at matched depth without SNLP training (Calvo et al.'s post-hoc setting; Qwen2.5-0.5B, WikiText-2, sequential PPL 31.67; all rows have critical-path depth 20):

configPPL
Calvo LP pairs (last 8 layers)70.8
SNLP 8×F1, IDN K=444.8
SNLP 8×F1, no correction K=4223.2
SNLP 12×F1, IDN K=834.3

At matched depth, the structured correction improves over both LP and the uncorrected iteration. On our trained models, Table 3 shows the same trend: at K=1, PPL with correction is 17.2/17.9/18.0, versus 37.4/67.2/div. without correction, for N=8/12/16. Post hoc, low-K settings degrade for all methods, consistent with our finding that SNLP-aware training is what makes the low-K regime usable. The derivation and the results above are in the new App. B.5.

From OpenReview, CC BY 4.0. Authors as signed there; shown unedited.

Related papers

Loading the map…

Discussion (0)

Sign in to comment.